Epson Artisan 730 - Page 267

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
Artisan 835/725/PX820FWD/TX820FWD/PX720WD/TX720WD Disassembly/assembly 267
Confidential
2. Open the Panel Unit. (See Fig. 8-8.)
3. Release the hook (x1) on the rear of the Panel Unit, and remove the Panel
Rear Cover.
Figure 8-8. Removing the Upper Housing (1)
4. Peel off the Panel FFC and the ferrite core that are secured to the Panel Shield
Plate with the double-sided tape (x2), and disconnect the Panel FFC from the
connector on the Panel Unit.
5. Pull out the ferrite core from the Panel FFC.
Figure 8-9. Removing the Upper Housing (2)
6. Remove the screws (x10) that secure the Upper Housing.
Figure 8-10. Removing the Upper Housing (3)
7. Lift the Panel Unit until the screw (x1) under the Right Hinge can be seen, and
remove the screw (x1).
Figure 8-11. Removing the Upper Housing (4)
Panel Unit
Panel Rear Cover
Hook
Rear of Panel Unit
Panel Unit
Connector
Panel FFCRear of Panel Unit
Double-sided tape
Panel Shield Plate
1
2
3
4
5
7
8
C.B.S. 3x6 (8±1Kgfcm)
C.B.S. 3x8 (black) (8±1Kgfcm)C.B.P. 3x10 (black) (6±1Kgfcm)
C.B.A. 3x6 (black) (6±1Kgfcm)
6
C.B.P. 3x10 (black) (6±1Kgfcm)
Upper Housing
Panel Unit
9
10
C.B.P. 3x10 (6±1Kgfcm)
Right Hinge
C.B.P. 3x12 (black) (6+1Kgfcm)