Epson WF-C5210 - Print Position Offset in CR Operation Direction

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
Troubleshooting Troubleshooting procedure 141
Confidential
PRINT POSITION OFFSET IN CR OPERATION DIRECTION
 Symptom
The image is offset in the main scanning direction (left and right margins
are not equal) and the left or right edge of the image is cut off.
Figure 4-7. Print Position Offset in CR Operation Direction
 Cause
 Paper load position offset
 Paper settings of main unit or printer driver settings are inappropriate.
 Print start position process adjustment value deviation
 Paper feeding failure
 PW Sensor is dirty or has deteriorated.
 PW Sensor adjustment value incorrect
 CR Scale dirty, damaged, or defective
Sub scanning line (feed) direction
Main scanning line (CR operation) direction