EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
Troubleshooting Fax Troubleshooting 180
Confidential
403
Failure
202
Receiver dose not have polling
sending capability.
RX
(POL)
B
404
Failure
202
No response after sending DCS.
TX B
405
Failure
202
Fall back is not possible in sending.
TX B
406
Failure
202
A DCN is sent after receiving DCS/
DTC.
RX/TX
(POL)
B
407
Failure
202
No response or received a DCN
after sending Postcommand.
TX D
408
Failure
202
Received a RTN.
TX D
409
Failure
202
Received a PIN.
TX D
410
Failure
202
Received a DCN during receiving
phase D.
RX D
411
Failure
202
Received a DCN after sending
DTC.
RX
(POL)
B
412
Failure
202
Cannot receive DSN after sending
FTT.
RX B
414
Failure
202
No response after sending DTC. RX
(POL)
B
415
Failure
202
No document for polling sending. TX
(POL)
B
416
Failure
202
Cannot receive Postcommand
RX D
417
Failure
202
Sent RTN
RX D
420
Failure
202
T1 timer timeout
RX B
422
Failure
202
Settings of DIS/DTC are disabled.
TX B
Error Code
Error description TX/RX Phase
Result of
communication
report
Job history
427
Failure
202
Received a DCN after sending DIS
RX B
433
Failure
202
(Modem): Frame length error
RX/TX B,D
434
Failure
202
(Modem): Frame wait timeout
RX/TX B,D
436
Failure
202
Received a DCN after sending CFR/
FTT
RX C
438
Failure
202
A DCN is sent after receiving DCS/
DTC.
RX/TX
(POL)
B
459
Failure
202
Training error occurs when
receiving PIX.
RX C
490
Failure
202
Number of error line exceeds the
limit value when receiving PIX.
RX C
494
Failure
202
(Modem): Timeout during EOL
RX C
495
Failure
202
Carrier disconnection during
receiving phase D
RX C
496
Failure
202
(Modem): Data sending start error
TX B,C
501
Failure
202
(V.34) Modem inconsistency error V.34
RX/TX
B
502
Failure
202
(V.34) Primary channel end error V.34
RX/TX
C
503
Failure
202
(V.34) Control channel end error V.34
RX/TX
B,C,D
504
Failure
202
(V.34) Polling sending request is
rejected in step V.8
RX
(POL)
B
505
Failure
202
(V.34) Rejected the polling sending
request in step V.8
TX
(POL)
B
540
Failure
202
(ECM) No response or received a
DCN after sending CTC
TX D
Error Code
Error description TX/RX Phase
Result of
communication
report
Job history