All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO -61- REV 0.0
CAN-BH.
The CAN-BH manages the data exchanged at medium speed between the electronic modules which
manage the passenger compartment comfort on the vehicle.
The control units interconnected by the CAN-BH are:
IPC (Instrument Panel Cluster)
RRM (Radio Receiver Module; infotelematic module VP1, VP2
AHM (Additional Heater Module)
LTM (Low Level Telematic Module)
HVAC (Heating Ventilation and Air Conditioning – Climate control module)
BCM (Body Control Module)
The CAN-BH is in the DLC multiple diagnosis connector.
The 120-ohm terminal resistors are in the BCM and the IPC module.
To Next Page
Loading...
