Fiat TIPO 2016 - Can-C1

All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO -60- REV 0.0
CAN-C1
The ECUs interconnected by the CAN-C1 are:
 BCM (Body Control Module)
 IPC (Instrument Panel Cluster)
 ORC (Occupant Restraint Control – Airbag module)
 AGSM (Automatic GearShift Module)
 DCTM (Dual Clutch Transmission Module)
 EPS (Electric Power Steering)
 ABS (Anti-lock Braking System Module)
 DCSM (Dual Clutch Shifter Module)
 PAM (Parking Aid Module)
 TCM (Automatic Transmission Control Module)
 ECM (Engine Control Module)
CAN-C1 reaches the DLC multiple diagnosis connector.
The 120-ohm terminal resistors of the CAN-C1 are located in the BCM and in the ECM.