All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO -94- REV 0.0
Trip Info
Speedometer
Use OK button to change speed units.
At max the speed has 3 digits, and the visualization it’s: Present only one digit for the visualization
from 0 to 9: 0,1,2,3,4,5,6,7,8,9 (not 000, 00, 001, 001 etc…). When there are two digits, The not
significant “zero” of the speed indication must not be shown ("20 km/h" and not "020 km/h").
Set CC speed display units should also change accordingly to Speedometer unit; otherwise,
odometer, temperature, gauge etc. would remain in the global unit selection state. When the customer
exits this menu the units returns to what has been set in the settings.
To Next Page
Loading...
