Flintec FT-111 - Page 37

FT-111, User Manual Rev. 2.0.0, June 2022 Page 37 of 137
ZR I Zero range of the indicated weight
The digital output is activated if the absolute indicated weight value is in the zero range. Refer to
parameter 366 to enter zero range value.
ZR G Zero range of the gross weight
The digital output is activated if the gross weight value is in the zero range. Refer to parameter 366 to
enter zero range value.
Stable
The digital output is activated at the displayed weight value is stable.
Error
The digital output is activated when any Error is announced on the display.
Remote Output of the PLC via fieldbus or BSI