Flintec FT-111 - Page 54

FT-111, User Manual Rev. 2.0.0, June 2022 Page 54 of 137
INTG
FLOA
:
:
Signed 32 bit integer, no decimal point
implied.
32 bit float, decimal point implied.
[
192
ADDRESS
:
001
]
Node address
[
19-
PROFINET
]
PROFINET CONFIGURATION (Appears if the option is installed)
Press key or key again to enter this menu.
Press key to go to thebeginning of the sub-block or press
key to go to the next main block.
[
191
FORMAT
:
INTG
]
Data format of the Profinet
Page 103
INTG
FLOA
:
:
Signed 32 bit integer, no decimal point implied.
32 bit float, decimal point implied.
[
192
IP
:
250
]
IP address of Ethernet port.
Default is 192.168.16.250
[
194
SUB MASK
:
000
]
Subnet mask address of Ethernet port.
Default is 255.255.255.000
[
195
GATEWAY
:
253
]
Gateway address.
Default is 192.168.16.253
[
196
S. NAME
:
SCAL
]
Station (device) name.
Default is SCALE-1. Station name can be up to 16 characters. Use only
Latin alphabet characters.
[
19A
MAC ADR
:
]
MAC address
AA:BB:CC:DD:EE:FF
[
19-
ETHERNET IP
]
ETHERNET/IP CONFIGURATION (Appears if the option is installed)
Press key or key again to enter this menu.
Press key to go to the beginning of the sub-block or press
key to go to the next main block.
[
191
FORMAT
:
INTG
]
Data format of the EtherNet/IP
Page 107
INTG
FLOA
:
:
Signed 32 bit integer, no decimal point implied.
32 bit float, decimal point implied.
[
192
IP
:
250
]
IP address of Ethernet port.
Default is 192.168.16.250
[
194
SUB MASK
:
000
]
Subnet mask address of Ethernet port.
Default is 255.255.255.000
[
195
GATEWAY
:
253
]
Gateway address.
Default is 192.168.16.253
[
19A
MAC ADR
:
]
MAC address
AA:BB:CC:DD:EE:FF