Fluke 6105A - Page 129

Remote Operation
SCPI Commands and Syntax 5
5-25
Keyword Parameter Form Notes
RESults? <cpd> { CH1 | CH2 | CH3 | CH4 | CH5 | CH6 }
Response =
<dnpd>, power or frequency.
<dnpd>, MUT Energy or counts.
<dnpd>, Ref. Energy or counts.
<dnpd> % Error or %
Registration.
Note: Interpretation of above
depends on setting of
ENERgy:PRESentation.
PRESentation(?) <cpd>,
<cpd>
{ COUNts | ENERgy }
{ PERRor | PREGistration }
:FLICker
[:STATe](?) <bool>{ OFF|ON|0|1 }
:FREQuency(?) <dnpd>
:UNIT(?) <cpd> [HZ | CPM]
:DEPTh(?) <dnpd>
:UNIT(?) <cpd> [HZ | CPM]
:PST? Deprecated
:SHAPe(?) <cpd>{ RECTangular | SINusoidal | SQUare}
:DUTY(?) <dnpd>
STATus
:OPERation
[:EVENt]? Query only.
:ENABle(?) <dnpd>
:CONDition? Query only.
:QUEStionable
[:EVENt]? Query only.
:ENABle(?) <dnpd>
:CONDition? Query only.
:PRESet
SYSTem
:ERRor? Query only.
:DATE(?) <dpnd>,<dpnd>,<dpnd> <dnpd> = Year, Month, Day.
TIME(?) <dpnd>,<dpnd>,<dpnd> <dnpd> = Hour, Minute, Second.
:VERSion? Query only.
:UNIT
:ANGLe(?) <cpd> {DEGrees|RADians} Selection affects all phase angle
entries.
:MHARmonics
:CURRent(?) <cpd> {PRMS | PFUNdamental | DBFundamental | ABSolute}
:VOLTage(?) <cpd> {PRMS | PFUNdamental | DBFundamental | ABSolute}