Introduction
Introduction 1
1-3
1-1. Introduction
The Fluke Electrical Power Standards, “the Instruments” or “The Instrument”, are precise
instruments for the calibration of Watthour meters and energy reference standards and
measuring devices used to determine the magnitude and quality of power supplied to
consumers. The range of power standards includes the 6100B, 6105A Master Instruments
and 6101B and 6106A Auxiliary Instruments.
Note
Unless otherwise stated, the use of “6100B” in this manual refers to the
entire product family.
The Instruments can each be used to provide a single phase of electrical power quality
and energy. Adding one to three 6101B or 6106A Auxiliary Instruments extends a system
to up to four phases. For greater flexibility, the 6100B and 6105A Master units can also
be configured as Auxiliaries by connecting one cable externally. The 6105A and 6106A
are high-accuracy versions of the 6100B and 6101B respectively.
1-2. Contacting Fluke
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-993-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-3434-0181
• Singapore: +65-738-5655
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com
.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals
.
1-3. General Safety Summary
This manual contains information and warnings that must be observed to ensure safe
operation and keep the Instrument in a safe condition. Operation or service in conditions
or in a manner other than specified could compromise safety. For the correct and safe use
of this Instrument, it is essential that both operating and service personnel follow
accepted safety procedures in addition to the safety precautions specified.
In this manual, a Warning identifies conditions and actions that pose hazard(s) to the
user; a Caution identifies conditions and actions that may damage the Instrument or the
test equipment.
To Next Page
Loading...
