Fluke 6105A - More Settings; Voltage from Current Transfer Factors; Save Setup and Load Setup Softkeys

6100B/6105A
Users Manual
4-10
4-14. More Settings
The More Settings softkey provides access to further functionality. See Figure 4-8.
Pressing  returns the softkeys to the top level.
gdw44.bmp
Figure 4-8. More Settings Softkeys
4-15. Voltage from Current Transfer Factors
The current output of the Instrument can be configured to output a voltage representing a
current from, for example, a current transformer with load resistor. In order for this
output to be used in power calculations, it is necessary to know how much current the
voltage represents. The transfer factors for all connected phases are set up using this pop-
up menu. See Figure 4-9.
gdw45.bmp
Figure 4-9. Voltage from Current
4-16. Save Setup and Load Setup Softkeys
When the Load Setup softkey is pushed, internal memory and external memory
connected via the USB ports are searched for previously saved setup files. Previous
setups can be copied to internal memory or external storage, renamed or deleted. The
name of the file where the current setup is to be stored can be edited by selecting the File
Name softkey and using the keyboard alphanumeric keys. Push the Save softkey to
store the current system setup.