Introduction
Electrical Specifications 1
1-27
1-62. References
6100B reactive power calculations are guided by the published work of Dr. Stefan Svensson:
Svensson, S., (1999), Power Measurement Techniques for Nonsinusoidal Conditions, Chalmers
Other pertinent papers are:
Budeanu, C., (1927), "Reactive and fictitious powers", Rumanian National Institute, No.2.
Czarnecki, L. S., (1885), "Considerations on the reactive power in nonsinusoidal situations", IEEE Trans. on Inst. and
Meas., Vol. 34, No. 3, pp399-404, Sept.
Czarnecki, L. S., (1987), "What is wrong with the Budeanu concept of reactive and distortion power and why it should
be abandoned", IEEE Trans. on Inst. and Meas., Vol. 36, No. 3, pp834-837, Sept
Filipski, P., (1980), "A new approach to reactive current and reactive power measurements in nonsinusoidal
systems", IEEE Trans. on Inst. and Meas., Vol. 29, No. 4, pp423-426, Dec.
Fryze, S., (1932), "Wirk- Blind- und Scheinleistung in elektrischen Stromkreisen mit nichtsinusformigen Verlauf von
Strom und Spannung", Elektrotechnische Zeitschrift, No25, pp 596-99, 625-627, 700-702.
Kusters, N. L. and Moore, W. J. M., (1980), "On the definition of reactive power under nonsinusoidal conditions",
IEEE Transaction on Power Apparatus and Systems, Vol PAS-99, No. 5, pp1845-1854, Sept/Oct.
Sharon, D., (1973), "Reactive power definition and power factor improvement in non-linear systems", PROC. IEE,
Vol. 120, No. 6, pp 704-706, July.
Shepherd, W. and Zakikhani, P., (1972), "Suggested definition of reactive power for nonsinusoidal systems", PROC.
IEE, Vol. 119, No. 9, pp 1361-1362, Sept.
IEC, Reactive power in nonsinusoidal situations, Report TC 25/wg7.
To Next Page
Loading...
