6100B/6105A
Users Manual
4-4
4-4. Basic Setup Procedures
Refer to Chapter 3 for an explanation of how to navigate though the user interface and
how to set up text and numeric values. When the Instrument start-up sequence is
complete, the instruments main setup page is displayed. See Figure 4-1.
gdw05.bmp
Figure 4-1. Main Setup Page
This main setup page contains the Output Menu at the top left. Below the Output Menu is
the Waveform Menu whose content will change depending on the waveform parameter
that is being edited.
Note
The Waveform Menu displays the waveform that will be used once the
channel is enabled. See also "Edit Mode" later in this chapter.
Navigate between the menus using
.The focus will move clockwise
around the three Menus.
To Next Page
Loading...
