Fluke 6105A - Page 177

Remote Operation
Device Settings at POWER ON 5
5-73
Setting Value Following *RST
:FHARmonics
:STATe OFF
:FLUCtuate<y> Harmonic 1 – 100 OFF
:MODulation Depth 0.0%
Frequency 10.0 Hz
:SHAPe SINusoidal
:IHARmonics
:STATe OFF
:SIGNal<y> State OFF
Amplitude 0.0%
Frequency 33 Hz
:DIP
:STATe OFF
:ENVelope Change to 10.0%
Ramp In 0.0001 seconds
Period 0.001 seconds
Ramp Out 0.0001 seconds
End Delay 0.0 seconds
TRIGger:
INPut: FREE
HOLDoff: DEL, 0.0
ODELay: 0.0
:FLICker
:STATe OFF
:FREQuency 13.5 Hz
:DEPTh 0.402
:SHAPe SQUare
:EFLicker
[:STATe](?) 0 or “OFF”
:CONFiguration(?) “PF”
:HSIDeband
:HARMonic(?) 3