FoxGate S6424-S2C2 series User Manual

GMRP Configuration
101
Switch(config)#interface range ethernet 0/0/2 to ethernet 0/0/3
Switch(config-if-range)#switchport mode trunk
Switch(config-if-range)#exit
!Configure GMRP
Switch(config)#gvrp
Turn on GVRP successfully
Switch(config)#gmrp
Turn on GMRP successfully.
Switch(config)#interface range ethernet 0/0/2 to ethernet 0/0/3
Switch(config-if-range)#gvrp
Switch(config-if-range)#gmrp
Switch(config-if-range)#exit
!GVRP configuration verification
Switch(config)#show gmrp
GMRP state : enable
Switch(config)#show gmrp interface ethernet 0/0/2 ethernet 0/0/3
port GMRP status
e0/0/2 enable
e0/0/3 enable
Total entries: 2.
*************************************************************
!Configuration on S3
*************************************************************
!Before configuration
Switch(config)#vlan 111,333
Switch(config-if-vlan)#switchport ethernet 0/0/1 to ethernet 0/0/10
Add VLAN port successfully.
Switch(config)#multicast mac-address 01:00:5e:03:03:03 vlan 333
adding multicast group successfully !
Switch(config)#multicast mac-address 01:00:5e:03:03:03 vlan 333 interface ethernet
0/0/1 to ethernet 0/0/10
adding multicast group port successfully !
Switch(config-if-vlan)#interface e 0/0/4
Switch(config-if-ethernet-0/0/4)#switchport mode trunk
Switch(config-if-ethernet-0/0/4)#exit

FoxGate S6424-S2C2 series Specifications

General

Brand	FoxGate
Model	S6424-S2C2 series
Category	Switch
Language	English