FoxGate S6424-S2C2 series User Manual

Command Line Interface
26
 Note:
Cursor keys can be used to retrieve the history commands in Windows 9X/2000/XP
Terminal and Telnet.
2.5 Common Command Line Error
Messages
All the input commands by users can be correctly executed, if they have passed the
grammar check. Otherwise, error messages will be reported to users. The common error
messages are listed in the following table.
Table 2-5 Common command line error messages
Error messages
Causes
Unrecognized command
Cannot find the command.
Cannot find the keyword.
Wrong parameter type.
The value of the parameter exceeds the range.
Incomplete command
The input command is incomplete.
Too many parameters
Enter too many parameters.
Ambiguous command
The parameters entered are not specific.
2.6 Symbols in Command
This publication uses these conventions to convey instructions and information:
Command descriptions use these conventions:
Commands and keywords are in boldface text.
Arguments for which you supply values are in italic.
Square brackets ([ ]) mean optional elements.
Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative
elements.
Braces and vertical bars within square brackets ([{ | }]) mean a requiredchoice within an
optional element.
Interactive examples use these conventions:
Terminal sessions and system displays are in screen font.
Information you enter is in boldface screen font.

FoxGate S6424-S2C2 series Specifications

General

Brand	FoxGate
Model	S6424-S2C2 series
Category	Switch
Language	English