FoxGate S6424-S2C2 series User Manual

IGMP Snooping
87
packets or not
Configure port whether waive report packets
or not
optional
3.2.12
Configure multicast preview
optional
3.2.13
Configure IGMP Snooping profile name list
optional
3.2.14
Display and maintain IGMP Snooping
optional
3.2.15
13.2.2 Enable IGMP Snooping
Table 13-2 Brief configuration of IGMP Snooping
Command
Operation
Remark
Enter global configuration mode
configure terminal
-
Enable IGMP Snooping
igmp-snooping
13.2.3 Configuring IGMP Snooping Timer
Table 13-3 Configure IGMP Snooping timer
Command
Operation
Remark
Enter global configuration mode
configure terminal
-
Configure IGMP Snooping
multicast interface aging time
igmp-snooping
host-aging-time time
optional
By default, dynamic
interface aging time
is300S
Configure maximum leave time
igmp-snooping
max-response-time time
optional
by default, maximum
leave time is 10S
13.2.4 Configuring Port Fast-Leave
Under normal circumstances, IGMP-Snooping on IGMP leave message is received
directly will not remove the port from the multicast group, but to wait some time before the port
from the multicast group.
Enabling quickly delete function, IGMP-Snooping IGMP leave packet received, directly to
the port from the multicast group. When the port is only one user, can be quickly removed to
save bandwidth.

FoxGate S6424-S2C2 series Specifications

General

Brand	FoxGate
Model	S6424-S2C2 series
Category	Switch
Language	English