FoxGate S6424-S2C2 series User Manual

MLD Snooping
279
40.2.2 Start MLD Snooping
Table 40-2 Start MLD Snooping
Operation
Command
Remarks
Enter global configuration
mode
configure terminal
-
Start MLD Snooping
mld-snooping
Required
40.2.3 Configuring MLD Snooping Timer
Table 40-3 Configuring IGMP Snooping Timer
Operation
Command
Remarks
Enter global
configuration mode
configure terminal
-
Configure dynamic
multicast member port
aging time
mld-snooping host-aging-time time
Optional
Default
configuration, the
dynamic aging time
of multicast member
ports 300S
Configure the maximum
response time to leave
mld-snooping max-response-time
time
Optional
Default
configuration, the
maximum response
time to leave the
10S
40.2.4 Fast-leave Configuration Port
Under normal circumstances, MLD-Snooping in MLD leave message is received directly
will not remove the port from the multicast group, but to wait some time before the port from
the multicast group.
Start quickly delete function, MLD-Snooping received MLD leave message, the direct port
from the multicast group. When the port is only one user, it can be quickly removed to save
bandwidth.
Table 40-4 Fast-leave configuration port
Operation
Command
Remarks
Enter global configuration
mode
configure terminal
-
Enter port configuration mode
interface ethernet interface-num
-
Fast-leave configuration port
mld-snooping fast-leave
Optional
Default configuration,
port fast-leave is
disabled

FoxGate S6424-S2C2 series Specifications

General

Brand	FoxGate
Model	S6424-S2C2 series
Category	Switch
Language	English