FoxGate S6424-S2C2 series User Manual

EFM configuration
262
34.2.9 Starting Remote Access Function MIB
Variable
Table 34-11 Start the remote access function MIB variable
Operation
Command
Remarks
Enter global configuration mode
configure terminal
-
Enter port configuration mode.
interface ethernet device / slot / port
-
Start the remote access function
MIB variable
efm variable-retrieval
Optional
By default, remote
access to MIB
variable is enabled
34.2.10 MIB Variable Access Requests Initiated by
Remote
Table 34-12 MIB variable access requests initiated by remote
Operation
Command
Remarks
Enter global configuration
mode
configure terminal
-
Enter port configuration mode.
interface ethernet device / slot / port
-
Port for the remote device MIB
variable value
show efm port port-id-list remote-mib
{phyadminstate | autonegadminstate}
Optional
Access to remote devices
global MIB variable values
show efm remote-mib {fecability |
fecmode}
Optional
Description:
 Only when the port EFM connection has been created, EFM working model is for the
proactive mode, the far side far side port supports MIB variable access function to the port
on the far end of the MIB variable for initiating the request.
 Currently only supports remote query capability of FEC, FEC mode, port status and
port to enable auto-negotiation enabled, the other MIB variables can later be added on
demand to achieve.
34.2.11 Display and Maintenance of EFM
After completing the above configuration, you can use the following command to display
the EFM configuration.
Table 34-13 Display and maintenance of EFM
Operation
Command
Remarks
Show EFM protocol
running
show efm status interface
[interface-name]
Perform either
of the
commands
Display summary
information EFM
show efm summary
Display EFM find
information
show efm discovery interface
[interface-name]

FoxGate S6424-S2C2 series Specifications

General

Brand	FoxGate
Model	S6424-S2C2 series
Category	Switch
Language	English