FoxGate S6424-S2C2 series User Manual

VLAN Configuration
69
Chapter 10. VLAN Configuration
10.1 Default VLAN Configuration
Table 10-1 Default VLAN configuration
Parameter
Default
Description
Existed VLAN
VLAN 1
The vlan-id argument ranges from 1 to
4,094.
VLAN 1 is the default VLAN of all ports.
VLAN description
/
VLAN description is characters ranged
from 1 to 32.
Port member of VLAN
All ports are the
members of VLAN 1.
10.2 Create and Modify VLAN
Switch supports 4094 VLANs.
Perform following commands in privilege mode.
Table 10.2 Create and modify VLAN
Operation
Command
Description
Enter global configuration
mode
configure terminal
Create a vlan and enter
vlan configuration mode
VLAN vlan-list
If the VLAN to be created exists, enter
the VLAN mode directly. Otherwise,
create the VLAN first, and then enter the
VLAN mode.
Vlan-id allowed to configure is in the
range of 1 to 4094. Vlan-list can be in the
form of discrete number, a sequence
number, or the combination of discrete
and sequence number, discrete number
of which is separate by comma, and
sequence number of which is separate
by subtraction sign, such as: 2, 5, 8,
10-20.
Add port member to a
vlan
switchport ethenet
device-num/slot-num/port-
num
Configure vlan
description
description vlan-name
By default, vlan description is empty.
Display the related
information about VLAN
show vlan vlan_id

FoxGate S6424-S2C2 series Specifications

General

Brand	FoxGate
Model	S6424-S2C2 series
Category	Switch
Language	English