FoxGate S6424-S2C2 series User Manual

Port-car Configuration
276
38.3 Display and Debug of Port-Car
Use following command in any configuration mode to check the configuration.
Table 37-7 Display and debug of Port-car
Operation
Command
Display port-car status
show port-car
38.4 Port-car Configuration Example
!Enable global port-car and configure global rate to be 200pps:
Switch#configure terminal
Switch(config)#port-car
Switch(config)#port-car-rate 200
！Enable port e0/1/1 port-car and configure rate to be 50pps:
Switch(config)#interface ethernet 0/1/1
Switch(config-if-ethernet-0/1/1)#port-car
Switch(config-if-ethernet-0/1/1)#port-car-rate 50

FoxGate S6424-S2C2 series Specifications

General

Brand	FoxGate
Model	S6424-S2C2 series
Category	Switch
Language	English