FoxGate S6424-S2C2 series User Manual

Command Line Interface
23
SuperVLAN-interface Configuration Mode
RIP Configuration Mode
OSPF Configuration Mode
PIM Configuration Mode
The following table describes the function features of different Configuration Modes and
the ways to enter or quit.
Table 2-1 Function feature of Command Configuration Mode
Command
Configuration
Mode
Function
Prompt
Command to enter
Command to
exit
User Mode
Show the basic
information
about
operation and
statistics
Switch>
Enter right after
connecting the switch
exit disconnects
to the switch
Privileged mode
Show the basic
information
about
operation and
statistics and
manage the
system
Switch#
Key in enable in user
mode
exit returns to
user mode; quit
disconnects to
the switch
Global
Configuration
Mode
Configure
system
parameters
Switch
(config)#
Key in configure
terminal in privileged
Mode
exit and end
returns to
privileged mode;
quit disconnects
to the switch
Interface
Configuration
Mode
Configure
Interface
parameters
Switch
(config-if-et
hernet-0/0/
1)
Key in interface
ethernet 0/0/1 in global
Configuration Mode
exit returns to
global
configuration
mode and end
returns to
privileged mode;
quit disconnects
to the switch
VLAN
Configuration
Mode
Configure
VLAN
parameters
Switch
(config-if-Vl
an)#
Key in vlan 1 in system
Configuration Mode
AAA Configuration
Mode
Create domain
Switch
(config-aaa
)#
Key in aaa in global
configuration mode
RADIUS
Configuration
Mode
Configure
RADIUS server
parameters
Switch
(config-radi
us-default)#
Key in radius host
default in AAA
configuration mode
exit returns to
privileged mode
and end returns
to AAA
configuration
mode; quit
disconnects to
the switch
Domain
Configuration
Mode
Configure
domain
parameters
Switch
(config-aaa
-test.com)#
Key in domain
test.com in AAA
configuration mode
VLAN interface
Configure IP
Switch(conf
Key in interface
end returns to

FoxGate S6424-S2C2 series Specifications

General

Brand	FoxGate
Model	S6424-S2C2 series
Category	Switch
Language	English