Monitor Link Configuration
show Flex Links and Monitor Link in Device C:
Device-C(config)#show interface switchport backup
ActiveInterface BackupInterface State
----------------------------------------------------------
e1/0/1 e1/0/2 active up /backup Standby
Preemption mode: Forced
Preemption Delay: 5 seconds
Total record 1.
Device-C(config)#show mac-address-table move update
Dst mac-address: : 01:80:c2:00:00:10
Default/Current settings: : Rcv Off/Off,Xmt Off/On
Rcv Count: : 0
Xmt Count: : 2
show Flex Links and Monitor Link in Device D:
Device-D(config)#show monitor-link-group
Monitor-link Group
--------------------------------------------------
Group 1:
UplinkID UplinkStatus
e1/0/1 UP
DownlinkID DownlinkStatus
e1/0/2 UP
Device-D(config)#show mac-address-table move update
Dst mac-address: : 01:80:c2:00:00:10
Default/Current settings: : Rcv Off/On,Xmt Off/Off
Rcv Count: : 1
Xmt Count: : 0