Maintenance
104
Maintenance
3
4
Insert the emptied hole punch waste container into its original position until it stops.
5
Close the finisher front door.
z
If the front door is not closed completely, a message appears and the machine will remain paused.
Replacing Stamp (for Duplex Automatic Document Feeder B1-PC)
If the machine offers the Fax service and the Stamp Kit SP (optional) is installed, replace
the stamp cartridge when stamp impressions start to fade.
z
Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash immediately.
z
Problems caused by using consumables not recommended by Fuji Xerox are not covered by the maintenance
service contract.
z
Before using consumables, carefully read instructions and precautions on their packages.
z
We recommend always keeping spare consumables/periodic replacement parts in stock.
z
To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)
1
Lift the document feeder gently, and open the Side 2 scanner.
To Next Page
Loading...
Need help?
General
