Fuji Xerox DocuCentre-VI C3371

Appendix
734
Appendix
16
30 sets
Important
z
When using 64 gsm paper
 Staple
z
Capability:
A4: 50 sheets (90 gsm or less), B4 or larger: 30 sheets (90 gsm or less)
z
Paper Size:
Maximum: A3, 11 x 17"
Minimum: B5
z
Position:
1 position or 2 positions
 Dimensions
Width 238 x Depth 478 x Height 461 mm
 Weight
12 kg
 Space Requirement (when connected to the main unit)
Width 1,255 x Depth 723 mm (main unit + Finisher A2, when the extension tray and the
bypass tray are fully extended)
Finisher B1 (Optional)
*
* : Finisher B1 cannot be installed to ApeosPort-VI C7771/C6671 or DocuCentre-VI C7771/C6671.
 Type
Sorting (Offset available)/ Stacking (Offset available)
 Paper Size
Maximum: A3、11×17"
Minimum: B5
Note
z
Paper in the sizes larger than A3 or 11 x 17" or smaller than B5 are delivered to the Center Tray.
 Paper Weight
52 - 220 gsm
*
* : 52 - 55 gsm output paper may not be aligned properly depending on the paper type.
 Paper Capacity
z
Unstapled sheets
A4: 2000 sheets, B4 or larger: 1,000 sheets, Mixed stack
*1
: 300 sheets
z
Stapled sheets
A4: 100 sets or 1000 sheets, B4 or larger: 75 sets or 750 sheets
75 sets or 750 sheets with dual stapling.
z
Creased + Stapled
*2
: 50 sets or 600 sheets