Executing 2 Sided Color Scanning Calibration
121
Maintenance
3
Executing 2 Sided Color Scanning Calibration
This section describes the procedures to adjust scan colors for side 1 and side 2 of the
duplex automatic document feeder.
z
For the correct output result, execute the calibration in advance. For the calibration, refer to "Executing
Calibration" (P.117).
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
z
The default user ID is "11111".
z
The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
z
When the Services Home screen is not displayed on the touch screen, press the <Services Home> button.
4
Select [System Settings] > [Common Service Settings] > [Image Quality Adjustment].
To Next Page
Loading...
Need help?
General
