Appendix
862
Appendix
16
tab of CentreWare Internet Services. If you want to change the setting to overwrite
mode, contact our Customer Support Center.
z
Only the Address Book data exported from [Data Export] on the [Address Book] tab of
CentreWare Internet Services is available for importing with [Data Import] on [Address
Book] tab.
z
When the Authentication feature is used and the characters other than alphanumeric
characters are used for the User ID, CentreWare Internet Services is not available.
Notes and Restrictions on Job Flows
îš„ Job Flows (ApeosPort Series Models Only)
z
If you transfer fax or Internet fax documents via SMB, FTP, or E-mail, the documents will
be converted into the standard size (such as A4 and A3) and printed.
z
If a Job Flow is performed with the following settings, an interference pattern may be
created:
- Original Type: [Photo & Text] or [Photo]
- Resolution: [400 dpi] or [600 dpi]
- Internet fax profile for sending Internet faxes: [TIFF-S]
z
If an interference pattern is created, change the settings as follows:
- Resolution: [200 dpi] or [300 dpi]
- Internet fax profile for sending Internet faxes: [TIFF-F] or [TIFF-J]
îš„ Web Application feature (ApeosPort Series Models Only)
z
The following conditions and restrictions are applied when you print files stored in a
remote server.
- [Output Destination] can be specified, but the staple and hole punch cannot be
specified.
- The [Pages per Side] feature can be specified only when you print PDF files.
- HTTP or HTTPS can be used for the communications between the machine and a
remote server.
- Printable file formats are [TIFF], [PDF], and [XPS].
- Print data is spooled to the hard disk of the machine, and then printed as a job.
Therefore, the print data is recognized as a job while the data is being spooled to the
hard disk.
- The Secure Print feature cannot be used.
- Printing is available even when [Auto Print] is set to [On] under [Machine Clock /
Timers].
- "Web Applications - Print" is displayed on the [Job Status] screen.
- The <Online> indicator is unlit while the print data is being spooled to the hard disk.
z
XPS stands for XML Paper Specification.
îš„ Job Flow Settings for High Compression Format
z
When [MRC High Compression] is set to [On] under [File Format] for the Scan features,
select one of the alternatives for each setting item:
- Color Scanning: [Auto Detect], [Color], or [Grayscale]
- Resolution: [200 dpi] or [300 dpi]
- Reduce / Enlarge: [100%]
- File Format (without thumbnail specification): [PDF], [DocuWorks], or [XPS]
To Next Page
Loading...
Need help?
General
