ESC/P-K Emulation
785
Appendix
16
ESC/P-K Emulation Print Features
Pages per Side
The Pages per Side feature reduces the size of multiple-sheet documents and prints them
on a single sheet of paper.
The Pages per Side feature can be used in the ESC/P-K emulation mode. In the ESC/P-K
mode, 2 Up can be used.
Form Overlay
In the ESC/P-K mode, you can register an original form on the machine, and overprint the
form on a printout.
The form to be used for overlaying can be specified on the control panel.
z
For more information on registering forms, contact our Customer Support Center.
Forms
You can use ESC/P-K to register forms on the machine. Up to 64 forms can be registered.
z
For more information on registering forms, contact our Customer Support Center.
ESC/P-K Emulation Settings
The following tables show the basic and extended settings that can be configured on the
ESC/P-K emulation mode menu.
Basic Settings
Setting Item Item
Number
Value
Output color 5 Sets the output color.
[0](Default): Color
[1]: Monochrome
Paper tray 3 Sets the paper tray to be used for printing.
[0]: Auto
[1] (Default): Tray 1
[2]: Tray 2
[3]: Tray 3
[4]: Tray 4
[5]: Tray 5
[6]: Tray 6 (HCF B1)
If printing from Tray 5, instruct printing and then operate the machine to
start printing. To cancel the setting, change the setting for "Tray
5Confirmation".
z
When Trays 1 to 4 and 6 is selected, the paper size is determined by the size of
paper loaded in the tray, and thus [Paper Size] cannot be set.
z
When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1 JTray 2 J Tray 3
J Tray 4 J Tray 6. If paper of the same size is loaded in multiple trays but in
different orientations, feeding of the paper loaded in the landscape orientation is
prioritized.
To Next Page
Loading...
Need help?
General
