Scanner Environment Settings
404
Scanner Environment Settings
9
obtained automatically or manual configuration is preferred, confirm the settings of an IP
address, a subnet mask, and a gateway address.
z
For information on how to set an IP address, refer to "Protocol Settings" (P.239).
4
Select [Close] repeatedly until the [Tools] screen is displayed.
5
Select [Close].
z
Rebooting the machine may be required depending on the settings. When a message appears on the screen,
follow the message and reboot the machine.
6
Print a configuration report to confirm that the SMB Client port or FTP client is enabled and
that TCP/IP is set up correctly.
z
For information on how to print a configuration report, refer to "Print Reports" (P.131).
Step 3 Configuration on the Computer
Create a destination folder on your computer.
Using FTP
Create a destination folder on the server where you login and set write rights on the folder.
Using SMB
Create a shared folder on your computer and set the write rights on the shared folder.
z
To use SMB on Mac OS X, set [File Sharing] to [On] in the [Service] tab of [Sharing] under [System
Preferences].
To Next Page
Loading...
