Problem Solving
704
Problem Solving
15
6
Remove the jammed staples (1), and then return the metal part pulled up in step 5 to the
original position (2).
7
Push the staple cartridge into the machine until it clicks into place.
8
Close the finisher front cover.
z
If the finisher front cover is not completely closed, a message will appear and the machine remains paused.
Staple Jams in Staple Cartridge (for C3 Finisher and C3 Finisher with
Booklet Maker)
This section describes how to clear staple jam occurred in the staple cartridge of the C3
Finisher (optional) and the C3 Finisher with Booklet Maker (optional).
1
Make sure that the machine is not operating, and open the finisher front door.
z
Be careful in removing jammed staples.
To Next Page
Loading...
Need help?
General
