Manual Adjust Paper Registration
755
Appendix
16
1
Check the sample printout, measuring the amount of scale misalignment.
2
Select [Slow Scan %].
3
Enter the adjustment value.
Specify a positive value to increase the scale, and a negative value to reduce it.
4
Select [Save].
Lead/Side Registration
Adjust the position of the image in the paper feed direction (lead registration) and in the
vertical direction in relation to the paper feed direction (side registration) in 0.1 mm
increments.
1
Check the sample printout, measuring the amount of print position misalignment.
2
Select [Lead/Side Registration].
3
Enter the adjustment value.
z
Lead Registration
Enter the D value to move the position of the image in the opposite direction of the
paper feed direction, and the U value to move the position of the image in the paper
feed direction.
z
Side Registration
Enter the R value to move the image toward the front of the machine, or the L value to
move the image toward the rear of the machine.
4
Select [Save].
To Next Page
Loading...
Need help?
General
