Customizing the Control Panel
33
Before Using the Machine
1
5
Select [Screen Default], and then select [Change Settings].
z
Select [ ] to display the previous screen or [ ] to display the next screen.
6
Select a service you want to display.
z
Select [ ] to display the previous screen or [ ] to display the next screen.
7
Select [Save].
Setting the Screen After Auto Clear
You can select the screen to be displayed after Auto Clear from [Last Selection Screen] or
[Services Home].
z
For information on Auto Clear, refer to "Auto Clear" (P.165).
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
z
The default user ID is "11111".
z
The default passcode is "x-admin".
To Next Page
Loading...
Need help?
General
