Connectivity & Network Setup
233
Tools
5
Connectivity & Network Setup
In [Connectivity & Network Setup], you can configure settings related to the Connectivity &
Network feature.
z
For information on Connectivity and Network Settings, refer to "Printer Environment Settings" (P.373) or "E-mail Environment
Settings" (P.387).
z
If you use CentreWare Internet Services, more detailed settings are possible. For more information, refer to
"CentreWare Internet Services Settings" (P.365).
1
On the [Tools] screen, select [System Settings] > [Connectivity & Network Setup].
z
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.156).
2
Select an item to set or change.
Port Settings
Set the interface of the machine connected to a client. In [Port Settings], you can configure
the following settings.
z
For LPD, Port 9100, HTTP-SSL/TLS, and SIP, do not use a number that is the same as a port number of another
port.
For a port that uses HTTP (IPP, Internet Service (HTTP), UPnP Discovery, SOAP, WebDAV, and Web Services on
Devices (WSD)), do not use a number that is the same as a port number of LPD, Port 9100, and HTTP-SSL/TLS.
Furthermore, if any of the above are set to one of the port numbers indicated below, operation may no longer
be performed properly depending on the setting conditions of the port:
25, 139, 427, 445, 631, 15000
z
Only LPD, Port9100, SNMP, Internet Services (HTTP), and Bonjour ports are available for Ethernet 2 when two
Ethernet interfaces are used.
z
Secondary Ethernet (optional) does not support IPP and Google Cloud Print ports. Print submission of AirPrint
and Google Cloud Print via Ethernet 2 is not available.
z
For information on HTTP-SSL/TLS port, refer to "HTTP - SSL/TLS Port Number" (P.258).
z
You can configure the Google Cloud Print port settings in CentreWare Internet Services. For more
information, refer to the help of CentreWare Internet Services.
z
To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the Internet. The communication fee shall be borne by you.
USB
îš„ Port Status
Select [Enabled] to use a USB interface.
îš„ Print Mode
Select the printer language use on the machine. Selecting [Auto] enables the machine to
automatically determine and use the most suitable language to print data received from
the host device.
To Next Page
Loading...
Need help?
General
