Problem Solving
514
Problem Solving
15
The Print Result is Not What was Expected
If the print result is not what was expected, identify the symptom in the following table to
perform the remedy.
The data has
been sent to the
machine.
The machine is out of
paper.
Load paper in the machine.
No paper is loaded for the
specified paper size.
Load paper of the size specified.
z
Refer to "Loading Paper" (P.56).
Printing is interrupted by a
copy operation.
Cancel the interrupting operation.
An error occurred in the
machine.
Check the error details and take an
appropriate action.
Symptom Cause Remedy
Cannot print in
color.
[Output Color] is set to
[Black and White].
Set [Output Color] to [Auto Detect] or
[Color].
Outputs are not
stapled.
The Finisher is not
installed.
The Finisher is required to staple. Install
the Finisher, or change the print option
settings to cancel stapling.
The number of pages
to be stapled exceeds
the maximum number
for stapling.
Reduce papers to be less than the
maximum number for stapling.The
maximum number of pages for stapling
varies depending on the used finisher.
z
For more information, refer to "Specifications"
(P.712).
The 2-sided printing
is not available.
The print page buffer
is insufficient.
Set [Image Quality] to [Standard] using
the print driver. Also, set the port that is
not used to [Disable]. (Only for the
machine with the optional add-on
memory.)
Paper is not folded. The Folder Unit is not
installed.
Check the optional components installed
on the machine, and reconfigure the
printer configuration.
The document is
printed on a
different paper size
than specified.
The document size is
different from the
paper size loaded in
the specified tray.
Change the size of paper in the tray, or
change the print option to specify a tray
that contains the correct sized paper.
The image on the
document edges is
missing on the
output.
The image is larger
than the printable
area.
Expand the printable area of the machine,
or reduce the image size on the printout.
The printed font
differs from the font
specified on the
computer.
Font replacement is
set on the print driver.
Check the font replacement table.
Symptom Cause Remedy
To Next Page
Loading...
Need help?
General
