Printer Environment Settings
378
Printer Environment Settings
7
5
Select [Close].
z
Rebooting the machine may be required depending on the settings. When a message displayed on the
screen, follow the message and reboot the machine.
6
Print a configuration report to confirm that the USB port is enabled.
z
For information on how to print a configuration report, refer to "Printer Reports" (P.133).
Step 3 Configuration on the Computer
To print from the machine, you need to install a print driver on your computer.
z
For information on the supported operating systems, refer to "Supported Operating Systems" (P.375).
z
For information on the driver installation procedures, refer to the Media Information contained in the Media
(Software/Product Manual).
z
For Mac OS X, you can use USB without the Adobe PostScript 3 Kit (optional) if you install the print driver for
Mac OS X contained in the media provided with the driver.
CentreWare Internet Services Setting Items
You can configure the following setting items using CentreWare Internet Services:
z
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet Services screen to see help.
z
To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the Internet. The communication fee shall be borne by you.
z
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.368).
z
Receiving buffer size for the USB interface
([Properties] > [General Setup] > [Memory Settings] > [USB])
z
Port Settings
z
Bi-directional Communication
z
Auto Eject Time
z
Adobe Communication Protocol
z
The Adobe Communication Protocol can be configured when the Adobe PostScript 3 Kit (optional) is
installed.
z
PostScript Wait Timeout
z
The PostScript Wait Timeout can be configured when the Adobe PostScript 3 Kit (optional) is installed.
To Next Page
Loading...
Need help?
General
