Notes and Restrictions
837
Appendix
16
z
After the machine exits the Power Saver mode, the value detected before the machine
enters the Power Saver mode is displayed or informed as paper tray status and the
information on the consumables such as the toner remaining amount, status of the drum
cartridge, and paper, if the service used for the output device is not activated.
z
After the machine exits the Power Saver mode, be careful for the following if you use the
copy feature before you activate the service used for the output device. The information
displayed such as a paper size specified for the paper tray or the remaining amount is
detected before the Power Saver mode. If you change the paper size or remaining
amount during the Power Saver mode, it takes a few seconds for the change to be
updated on the screen.
z
Exiting the Power Saver mode activates the entire machine when Copy, Simple Copy, or
Stored Programming is set as the default screen on the touch screen.
z
Exiting the Power Saver mode activates the entire machine when [Paper Tray Attributes
During Loading] is set to [On].
z
The entire machine exits the Power Saver mode when you press the <Machine Status>
button, enter the System Administration mode, or select the Stored Programming
service.
z
The machine does not exit the Sleep mode when you use the EP service by EP-BB.
z
When [Tools] > [System Settings] > [Connectivity & Network Setup] > [Port Settings] >
[USB] > [USB - Print Mode] is set to any option other than [Auto], exiting the Power Saver
mode activates the entire machine.
z
The output device is activated when Secure Print is executed using job tickets of
ContentsBridge Utility.
îš„ About View Image Generation
It may take time for generating view images depending on the type of document. If you
want to speed up the printing process or there is no need for displaying view images, you
can disable the image generation setting of the print driver.
z
The print driver settings have priority over the machine settings.
Notes and Restrictions on the Use of the Copy Feature
îš„ Copy Feature
The machine does not offer the feature to make copies of entire document.
îš„ Meter Count for Dual Color and Single Color Copies
Dual color and single color copies are counted as color copies.
îš„ Color Effect for Dual Color Copy
To extract colors for dual color copy, adjusting the colors of the document is required in
advance.
Our service representative performs the adjustment. Contact our Customer Support Center.
îš„ Auto Contrast
The machine does not offer the Auto Contrast feature for [Color Effects].
To Next Page
Loading...
Need help?
General
