Fold Position Adjustment
765
Appendix
16
7
Select [Fold Position Type Setup], and then select [Change Settings].
8
Select a type, and select [Change Settings].
9
Select [Name], and select [Change Settings].
10
Enter the type name, and then select [Save].
z
We recommend you to use a name such as "Single Fold Plain" that allows you to know what the content is.
11
Select the fold type, and then select [Change Settings].
z
For details on making each fold adjustment, refer to the following sections.
z
For single fold, refer to "Single Fold Position Adjustment" (P.765).
z
For booklet, refer to "Booklet Position Adjustment" (P.767).
z
For C fold, refer to "C Fold Position Adjustment" (P.769).
z
For Z fold, refer to "Z Fold Position Adjustment" (P.771).
z
For Z fold half sheet, refer to "Z Fold Half Sheet Position Adjustment" (P.773).
Single Fold Position Adjustment
Adjust the single fold position.
To Next Page
Loading...
Need help?
General
