Fuji Xerox DocuCentre-VI C3371 Administrator's Guide

Appendix
766
Appendix
16
1 Select [Single Fold], and then select [Change Settings].
2 Specify [Sheets to be folded], and then select [Sample Printout].
3 Select the tray in which you loaded paper, and press the <Start> button.
The sample is printed.
4 Select [Close].
5 Check the sample printout, measuring the misaligned amounts.
6 Select [Long at Left] or [Long at Right], and enter the value you measured in the step 5 in
[Value A Before Adjustment].
7 Select [Adjust].
8 Select [Sample Printout] again.

Fuji Xerox DocuCentre-VI C3371 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-VI C3371
Category	All in One Printer
Language	English