Setup
337
Tools
5
4
Select [Save].
Internet Fax Profile
Set the format of the Internet fax profile.
A profile is specified to restrict attribute information such as image resolution and paper
size for transmissions between Internet Fax-enabled machines.
îš„ TIFF-S
The Internet fax standard profile. For documents larger than A4, the size is automatically
reduced to A4 when transmission.
îš„ TIFF-F
Select this profile when you specify [Superfine] for [Resolution] or when you send A3 or B4
documents.
îš„ TIFF-J
Select this profile for sending documents in JBIG.
When the [Delete Entry] Button is Selected
Selecting this button deletes all the information registered for the address selected. To
delete all information registered, select [Delete].
z
Deleted information cannot be restored.
Create Fax Group Recipients
You can register addresses for broadcast transmission as a group. Each group can include
up to 20 address numbers. The maximum number of groups that can be registered is 50.
Note that recipients to be added to a group must be registered in the speed dials on the
Address Book.
z
Even when the speed dial number of fax recipients (address book entries) are included in a group, the
machine does not send faxes to the recipients if their address types are set to [E-mail] or [Server].
z
You cannot include a group in another group.
z
You can use wildcards for specifying the numbers in the last one or two digits as shown in the following
example:
z
001*:Specifies the 10 addresses with address numbers 010 to 019.
z
****:Specifies all address numbers.
1
Select [Create Fax Group Recipients].
To Next Page
Loading...
