Appendix
744
Appendix
16
Optional Components
The following table shows the optional components available. To purchase these options,
contact our Customer Support Center.
Product Name Description
Large Size UI Kit A control panel with 10.4 inch SVGA color touch screen.
Large Size UI Installation Kit A kit to set the Large Size UI to the machine.
z
For ApeosPort-VI C5571/C4471/C3371/C3370/C2271, DocuCentre-
VI C5571/C4471/C3371/C3370/C2271
Large Size UI Installation Kit
2
A kit to set the Large Size UI to the machine.
z
For ApeosPort-VI C7771/C6671, DocuCentre-VI C7771/C6671
Side Tray Delivers output face up.
z
For China, Taiwan, and Korea
Stand A stand installed to the machine.
z
For China
2 Tray Module Module with two paper trays.
z
For China
Finisher A2 Staples output sheets.
Finisher B1 Staples output sheets.
Booklet Maker Unit for
Finisher B1
Staples output sheets. Also folds output sheets in half or staples
them.
2/4 Hole Punch Kit for
Finisher B1
2/4 hole-punches output sheets.
z
Finisher B1 is required.
US 2/3 Hole Punch Kit for
Finisher B1
2/3 hole-punches output sheets.
z
Finisher B1 is required.
C3 Finisher Staples output sheets.
C3 Finisher with Booklet
Maker
Staples output sheets. Also folds output sheets in half or staples
them.
Transport Unit H3 Transfers paper output to the C3 Finisher or C3 Finisher with
Booklet Maker.
z
Required to install C3 Finisher or C3 Finisher with Booklet Maker.
C3 Finisher Punch Unit
2H/4H
2/4 hole-punches output sheets.
z
C3 Finisher or C3 Finisher with Booklet Maker is required.
To Next Page
Loading...
Need help?
General
