Paper and Other Media
70
Paper and Other Media
2
5
While pinching the paper guide, lightly align the edge to the edge of the paper.
6
Push the tray in gently until it stops.
z
Affix the paper size label to the front of the paper tray.
7
Specify the type of loaded paper when you have changed the paper type.
z
For information on how to set the paper types, refer to "Changing the Paper Settings" (P.73).
Changing the Paper Size for Tray 6 (HCF (A4 1 Tray))
The following describes how to change paper size in Tray 6 (HCF (A4 1 Tray)) (optional).
1
Pull out Tray 6 until it stops.
z
While the machine is processing a job, do not pull out the tray that is being used for the job.
z
Do not add a new stack of paper on top of the remaining paper in the tray to prevent paper jams or any other
troubles. First, remove the remaining paper from the tray, and then load the new stack of paper.
2
Remove any paper loaded in the tray.
3
Open the end guide (1) and unscrew the screw (2). And then remove the guide from the
tray.
z
Make sure to pull out the tray slowly. If the tray is pulled out with
too much force, the tray might possibly hit your knees or other parts
of your body and cause injuries.
To Next Page
Loading...
Need help?
General
