Changing the Paper Size
69
Paper and Other Media
2
1
Pull out tray 4 until it stops.
z
While the machine is processing a job, do not pull out the tray that is being used for the job.
z
To prevent paper jams or erroneous detection of loaded paper in a tray by the machine, do not add paper on
top of any remaining paper in the tray.
2
Remove any paper loaded in the tray.
3
Pinch the paper guide and slide it to the desired paper size.
4
Load and align the edge of the paper against the left edge of the tray, with the side to be
copied or printed on facing down.
z
Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction.
z
Make sure to pull out the tray slowly. When the tray is being pulled out
with force, the tray may possibly hit your knees or other parts of your
body causing injuries.