Appendix
872
Appendix
16
Activity Report
You can print activity reports to check whether a transmission is successfully completed or
not. In the report, a remote terminal name and a result or a status of each operation are
recorded by outgoing and incoming transmission.
z
The use of ApeosWare Log Management (sold separately) allows you to import the contents of an Activity
Report to a computer. For information on ApeosWare Log Management refer to the manuals provided with
the software.
z
For information on how to print the activity report, refer to "Print Reports" (P.131).
Item Description
No. The serial numbers for transmissions is shown.
Doc. Job numbers that the machine automatically assigned to documents
when the documents were received.
Remote Station Information on recipient to which transmission is made is recorded in the
following order of priority.
z
Transmitting (speed dialing)
1 Recipient
2 Remote terminal name
3 G3 ID (including spaces)
4 Tel. No.
5 Communication mode EC (or G3, SG3)
When IP Fax (SIP) is used:
1 Recipient
2 Remote terminal name
3 G3 ID (including spaces)
4 SIP address
5 Communication mode IP Fax or IP Fax-ECM
z
Transmitting (when all digits are dialed)
1 Remote terminal name
2 G3 ID (including spaces)
3 Tel. No.
4 Communication mode EC (or G3, SG3)
When IP Fax (SIP) is used:
1 Remote terminal name
2 G3 ID (including spaces)
3 Tel. No.
4 SIP address
5 Communication mode IP Fax or IP Fax-ECM
z
Receiving
1 Remote terminal name
2 G3 ID (including spaces)
3 Communication mode EC (or G3, SG3)
When IP Fax (SIP) is used:
1 Remote terminal name
2 G3 ID (including spaces)
3 Communication mode IP Fax or IP Fax-ECM
z
You can set the number of character digits displayed for the recipient whether
the first 40 digits or the last 40 digits. For details on setting up, see "Activity
Report - Recipient" (P.185). The factory default displays the first 40 digits.
To Next Page
Loading...
Need help?
General
