Using the Telephone
871
Appendix
16
z
The call destination can be specified also with the keyboard displayed on the screen.
z
To disconnect the call, select [Line Cut].
z
If your telephone line is set to touch-tone, [Tone (:)] does not appear.
z
If you want to send tones (or to use the touch-tone services) while using a pulse line, select [Tone (:)].
z
Some touch-tone services may not be available even if you set your telephone to send tones.
4
When the call is connected, lift the receiver and start speaking.
5
After the call is finished, place the receiver back in the cradle.
z
Make sure that the receiver is placed properly in the cradle. Otherwise, the line remains "busy".
To Next Page
Loading...
Need help?
General
