Specifications
735
Appendix
16
z
Creased
*2
: 500 sheets
*1 : With paper of a larger size delivered on paper of a smaller size.
*2 : For Crease + Staple, the Booklet Maker Unit for Finisher-B1 (optional) is required. Note that the next job will not be output
until the creased and stapled booklet is removed from the finisher tray, and that the creased and stapled booklet will not be
output when the output paper remaining on the finisher tray is of a smaller size.
z
When using 64 gsm paper
îš„ Staple
z
Capacity:
50 sheets (90 gsm or less)
z
Paper Size:
Maximum: A3, 11 x 17"
Minimum: B5
z
Position:
1 position or 2 positions
z
When using 64 gsm paper
îš„ Punch
*
z
Number of Holes: 2/4 holes, or 2/3 holes (US Specifications)
z
Paper Size: A3, 11 x 17", B4, A4
*
, A4 , Letter
*
, Letter , B5
* : 3-hole punch is not applicable.
z
Paper Weight: 55 to 200 gsm
z
When using 64 gsm paper
* : For punching, 2/4 Hole Punch Kit for Finisher-B1 (optional) or US 2/3 Hole Punch Kit for Finisher-B1 (optional) is required.
îš„ Booklet Finishing
*
z
Sheets per subset:
15 sheets (Crease + Staple), 5 sheets (Crease)
z
Paper Size:
Maximum: A3, 11 x 17"
Minimum: A4, Letter
z
Paper Weight
64 - 80 gsm (Crease + Staple), 64 - 105 gsm (Crease)
* : For Crease + Staple, the Booklet Maker Unit for Finisher-B1 (optional) is required. Note that the next job will not be output until
the creased and stapled booklet is removed from the finisher tray, and that the creased and stapled booklet will not be output
when the output paper remaining on the finisher tray is of a smaller size.
îš„ Dimensions
Width 620 x Depth 552 x Height 987mm
Width 620 x Depth 597 x Height 1057 mm (with the Booklet Maker Unit)
îš„ Weight
28 kg
37 kg (with the Booklet Maker Unit)
To Next Page
Loading...
Need help?
General
