EasyManuals Logo

Fuji Xerox DocuCentre-VI C3371 Administrator's Guide

Fuji Xerox DocuCentre-VI C3371
889 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
Common Service Settings
171
Tools
5
Auto Display of Login Screen
When the Authentication feature is enabled on the machine, set whether or not to
automatically display the login screen after turning on the machine or canceling the Power
Saver mode.
Custom Buttons 1 to 3
You can assign services such as Copy and Send from Folder to the custom buttons on the
control panel: Custom Button 1 to Custom Button 3. To leave a feature unassigned, select
[(Not Set)].
Note
z
By factory default, the following services are assigned to each button: [Copy] for the Custom Button 1, [Fax]
for the Custom Button 2, and [Review] for the Custom Button 3.
Reference
z
For more information, refer to "Assigning Services to the Custom Buttons" (P.40).
One-touch Buttons
Set the number of address numbers that are assigned to the one-touch buttons.
îš„ Type 1
Assigns the one-touch buttons 1 to 70 to the address numbers 0001 to 0070, and buttons
M01 and M02 to the stored programming jobs 1 and 2.
îš„ Type 2
Assigns the one-touch buttons 1 to 60 to the address numbers 0001 to 0060, and buttons
61 to 70, M01, and M02 to the stored programming jobs 1 and 12.
Note
z
[Type 1] is selected by factory default.
Services Home
Set the layout of service buttons that appear on the Services Home screen.
Reference
z
For more information on how to set the buttons, refer to "Customizing the Button Layout" (P.35).
Services Home - Additional Features
Set the layout of additional feature buttons that appear on the Services Home screen.
Note
z
If you do not want to display [Setup] as an additional feature button, select the [Show this in Admin mode]
check box. You can set or change settings with the machine only when it is in the System Administration
mode.
Reference
z
For more information on how to set the buttons, refer to "Customizing the Button Layout" (P.35).
Job Type on Job Status screen
Select the job types to be shown on the [Completed Jobs] screen under the [Job Status]
screen that is displayed when the <Job Status> button on the control panel is pressed.
Select from [All Jobs], [Printer & Print from Folder Jobs], [Scan, Fax, & Internet Fax Jobs], or
[Job Flow & File Transfer Jobs].

Table of Contents

Other manuals for Fuji Xerox DocuCentre-VI C3371

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-VI C3371 and is the answer not in the manual?

Fuji Xerox DocuCentre-VI C3371 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-VI C3371
CategoryAll in One Printer
LanguageEnglish

Related product manuals