Tools
186
Tools
5
Delete All Data
This feature is designed to prevent the leakage of confidential information of a customer
when the machine is returned to Fuji Xerox. All data stored on the machine will be deleted.
Before executing the operation, make sure that the operation is absolutely necessary.
z
It takes several minutes to several hours to delete all data. (The time taken depends on the machine
configuration or the hard disk capacity.)
Software Options
This feature is for service representative use. For more information, contact our Customer
Support Center.
Software Upgrade
When EP system via the Internet is used, this feature is used to upgrade the software for EP
system when the version upgrade is required.
You can specify when to start the software upgrade.
z
After the downloading is finished, the machine automatically restarts and upgrades the software. After the
machine restarts again and the Services Home screen is displayed, the software upgrade is completed.
z
EP system may not be available in your region. For more information, contact our Customer Support Center.
z
To use this feature, a dedicated contract is needed in addition to a use of the EP system service. For more
information, contact our Customer Support Center.
z
For information on EP system, refer to "EP System" (P.875).
1
Select [Software Upgrade].
îš„ Start Upgrade
Starts a version upgrade soon.
îš„ Schedule Upgrade
Select [On] and specify the date and time to start a version upgrade.
Power on Self Test
Set whether or not to perform self test when the machine is turned on and started up.
If any abnormal condition such as intentional program modification is found during the
program diagnosis, the machine stops starting up and records the information in the audit
log.
z
The information may not be recorded in the audit log depending on the status of program malfunction.
z
If the machine does not start, contact our Customer Support Center.
To Next Page
Loading...
Need help?
General
