Tools
268
Tools
5
îš„ Display Message
Does not use a substitute tray, but displays a paper loading message.
îš„ Use Larger Size
Switches to the next larger size of paper than previously selected and prints at the same
magnification.
îš„ Use Closest Size
Switches to the closest size of paper to previously selected and prints. If necessary, the
image is automatically reduced in size on the paper.
z
If there is a client specification, the client specification is prioritized.
îš„ Select Tray 5
Prints using the paper loaded in Tray 5.
Paper Type Mismatch
Set an action to take when the paper type loaded in the paper tray does not match the
paper type specified when a print job is submitted.
îš„ Print
Prints using the paper loaded in the tray.
îš„ Display Confirmation Screen
A confirmation screen appears to ask whether or not to print the job.
If a paper type mismatch occurs during printing, the machine ignores the paper type
specified and prints the job in accordance with [Paper Tray Priority], [Paper Size], or
[Substitute Tray].
z
For more information, refer to "Automatic Tray Selection" (P.56).
îš„ Display Paper Supply Screen
Load another type of paper in the selected tray by following the message displayed on the
touch screen, and then select the [Start] button. The machine changes the paper type
setting for the tray and prints the job.
z
The machine keeps the changed paper type setting after the printing.
z
Even if you select the [Start] button without loading another type of paper in the selected tray, the machine
considers the paper type has been changed and prints the job. Consequently, the print quality cannot be
guaranteed because the paper type loaded in the paper tray does not match the paper type specified.
Unregistered Forms
Set whether or not to print a job if a form specified for printing in a form data file (overlay
printing) is not registered on the machine. If you specify [Print], only the data is printed
because the specified form is not present.
z
This setting works only when the emulation feature is used.
To Next Page
Loading...
Need help?
General
