Tools
270
Tools
5
îš„ Start Sheet
Prints a banner sheet before a print job.
îš„ End Sheet
Prints a banner sheet after a print job.
îš„ Start Sheet & End Sheet
Prints a banner sheet before and after a print job.
îš„ Allow Print Driver to Override
Select the check box to print a banner sheet according to the banner sheet print settings of
the print driver.
Banner Sheet Offset
Set whether or not to offset when banner sheets are output.
Banner Sheet Tray
Select a paper tray used for banner sheets.
This setting applies to Trays 1 to 4 and 6 (optional). You cannot apply this setting to Tray 5.
PostScript Default Color
Set the default value for Post Script output color.
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
PostScript Paper Supply
Select whether the PostScript Deferred Media Selection feature is enabled or disabled when
the paper tray is selected. Select [Auto Select] to enable the PostScript Deferred Media
Selection feature, or [Select Paper Tray] to disable the feature.
When PostScript data generated by other than the print driver is printed, the tray is not
selected as intended depending on the description method of the PostScript data. In this
case, select [Select Paper Tray].
z
Even when you select [Auto Select], the setting is automatically changed to [Select Paper Tray] when [Use
Larger Size] or [Use Closest Size] is selected for [Substitute Tray] and print PostScript data.
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
PostScript Font Absence
Set an action to take when a PostScript font specified in a job is not present.
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
îš„ Cancel Printing
Cancels printing.
îš„ Substitute Font and Print
Prints using a substitute font. Courier is used as the substitute font.