Fuji Xerox DocuCentre-VI C3371 Administrator's Guide

Specifications
739
Appendix
16
 Staple
z
Capability : 50 sheets (90 gsm or less)
Note
z
When the C3 Finisher Staple Unit 65 Sheets (optional) is installed, at the maximum of 65 sheets can be
stapled. Depending on the paper type, copies may not be aligned or stapled properly.
z
When using with Folder Unit CD1, Z-fold sheets can be stapled; however, since one Z-fold sheet of A3 or 11 x
17" paper becomes the same in thickness as 10 sheets of unfold paper, the maximum number of Z-fold
sheets of A3 or 11 x 17" paper that can be stapled is reduced. When converted into unfold sheets of paper
that can be stapled, one Z-fold sheet of A3 or 11 x 17" paper is equivalent to 10 sheets of unfold paper and
one Z-fold sheet of other size of paper is equivalent to 20 sheets of unfold paper. If the curl in the paper is
very strong, the output paper may not be stapled properly.
z
Paper size
Maximum: A3, 11 x 17"
Minimum: B5
z
Position
1 position or 2 positions
Important
z
When using 64 gsm paper.
 Punch
z
Number of holes: 2/4 holes, US 2/3 holes (US Specifications)
z
Paper size
A3, 11 x 17", B4, A4
*
, A4 , Letter
*
, Letter , B5 , 7.25 x 10.5" (184 x 267 mm), 8 x 10"
(203 x 254 mm)
*
, 16K (194 x 267mm) , Cover A4 (223 x 297 mm), 9 x 11" (229 x 279
mm) , 215 x 315 mm, 8.5 x 13" (216 x 330 mm)
*
, Legal (8.5 x 14"), 11 x 15" (279 x 381
mm), 8K (267 x 388 mm)
* : The 3 holes (optional) are not available.
Note
z
For punching, Punch Unit 2/4H CD1 (optional) or Punch Unit US 2/3H CD1 (optional) is required.
z
You can switch the number of punch holes between 2 holes and 4 holes with the Punch Unit 2/4H CD1
(optional), and US 2 holes and US 3 holes with the Punch Unit US 2/3H CD1 (optional).
Paper weight : 52 - 200 gsm
Important
z
When using 64 gsm paper.
 Booklet Finishing
Sheets per subset : 16 sheets (Fold + Staple)
*1
(Maximum) 5 sheets (Fold + Unstaple),
1 sheet (Single Fold)
Paper size
Maximum : SRA3 (320 x 450 mm), 12 x 18" (305 x 457 mm)
Minimum : B5
Paper weight : 60 - 220 gsm (Fold + Staple)
*2*3
60 - 220 gsm (Fold + Unstaple)
*3
60 - 105 gsm (Single Fold)

Fuji Xerox DocuCentre-VI C3371 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-VI C3371
Category	All in One Printer
Language	English